Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL VOSS.SONIC 360 FUSION
In fo
On delivery, the built-in batteries are partially charged. We
recommend fully charging the batteries in the device when
using it for the first time. To charge the device, see section 9.1.
Set the trigger radius with the radius switch (8) and set the desired
function with the function switch (5).
N OTIC E
Make sure that the correct radius is set for the area to be
secured.
As soon as the device is switched on, the red control LED (4) on
the main side (side A) of the device flashes once.
After approx. 10 seconds, the unit triggers once according to the
settings. The red control LED (4) lights up during this time and
then switches off automatically.
The device is ready for operation.
In fo
Changing the settings when the device is switched on is not
signalled again by the device. The settings apply automatically
the next time the device is triggered.
9
MAINTENANCE
The device requires little maintenance. However, you should
carry out regular visual inspections. Check the device for damage
before each use. There are no serviceable parts inside the device.
NOTI C E
Do not use the device if there is any visible damage.
45085 - 11.2022 - V3
DE
EN
FR
IT
NL
SV
ES
PL
25
