VOSS sonic 360 fusion Instrucciones De Operación página 23

Ocultar thumbs Ver también para sonic 360 fusion:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
INSTRUCTION MANUAL VOSS.SONIC 360 FUSION
Symbol
7
THE RIGHT LOCATION
When selecting the installation site, observe the general safety
instructions in chapter 2 and the following points:
The VOSS.sonic 360 fusion can be used both
with and without a mounting post. To assemble
the mounting post, insert the three parts of the
post into each other and slide the post onto the
sliding connection (6) on the underside of the
device (see illustration).
Info
The height of the mounting post can be
adjusted by removing the middle segment.
Do not place the device in sunken areas without
a mounting post to protect it from water
accumulation.
Do not place the device in walkways. Make sure that the device
does not become a tripping hazard for other people.
For best results, make sure that the device is not covered by
anything This would reflect or absorb the sound waves.
The VOSS.sonic 360 fusion secures an area of up to approx.
200 m², depending on local conditions. Ensure that no other
people's properties are affected without the owner's consent.
When positioning the device, make sure that the correct trigger
radius is set for the area to be protected (see chapter 8).
45085 - 11.2022 - V3
Meaning
Documents the product' s compliance with UK
directives
Read the operating instructions
Positive polarity
DE
EN
FR
IT
NL
SV
ES
PL
23
loading

Este manual también es adecuado para:

45085