Operation; Description Of The Appliance; Before Startup; Water Supply - Kärcher K 3.190 Manual De Instrucciones

Operation

Description of the Appliance

Illustrations on Page 2
1 Quick coupling for high pressure hose
2 High pressure connection
3 Appliance switch "0/OFF"/ „I/ON"
4 Storage for mains connection cable
5 Storage for high pressure hose
6 Transport handle
7 Storage for spray lance
8 Storage for trigger gun
9 Water connection with integrated sieve
10 Detergent suction hose with detergent
filter and lid
11 Detergent Tank
12 Coupling element for water connection
13 Mains cable with mains plug
14 Bearing wheel
15 Trigger gun
16 Lock trigger gun
17 Key to detach the high pressure hose
from the trigger gun
18 High pressure hose
19 Spray lance with pressure regulation
(Vario Power)
20 Spray lance with Dirtblaster
21 Washing brush
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Before Startup

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration
 Push the wheels into the intake.
 Secure the wheels using the included
plug. Align the plug properly!
Illustration
 Insert the transport handle and screw in.
Illustration
 Fasten the quick coupling for the high
pressure hose to the high pressure con-
nection.
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
 Check the secure connection by pulling
on the high pressure hose.
Illustration
 Pull the suction hose for detergent
through the cover of the detergent tank
until the filter contacts the bottom of the
tank.
 Close the detergent tank with the lid.
 Lock the detergent tank in place on the
appliance.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
-CAUTION
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Water supply from mains
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
 Use a fibre-reinforced water hose (not
included) with a standard coupling.
(Minimum diameter 1/2 inch (13 mm),
minimum length 7.5 m).
Illustration
 Screw the coupling element to the wa-
ter connection on the appliance.
 Push the water supply hose onto the
coupling unit, then connect it to the wa-
ter supply.
– 7
EN

Water supply

15