Idiomas disponibles
Idiomas disponibles
REF.54290
Adjusting fluid level
Increase fluid amount
When the fluid in the transmission system is not enough, fill it
with more fluid.
In the main menu, select "Adjust fluid level".
Then, select "Filling".
Input the amount to be filled and press the ENTER key.
When the recharging is completed, the system will automati-
cally show the print menu.
Press ENTER key select print.
Press RETURN key to cancel printing.
Decrease fluid amount
If the quantity of liquid is more than it is needed, it is neces-
sary to decrease it.
In the main menu, select "Adjust fluid level".
Then, select "Draining".
Input the amount to be drained and press the ENTER key.
Then, start the engine. The unit will drain the set quantity of
liquid to the used fluid tank.
After the draining is completed, the display will show the
main menu.
Once the main menu is displayed you can turn off the engine.
Empty new fluid tank
Be sure that the two hoses marked with "TO TRANSMISSION"
are not connected to the vehicle.
Open the handle valve on the fluid hose marked with
"EMPTY".
Place the hose into a container.
The system will show the empty new tank interface and
automatically start fluid draining operation.
The unit will drain fluid until the hose marked with "Empty"
has no fluid.
You can press the RETURN key to stop the draining operation.
· 21 ·
