Transceiver J-Box Connection To Power Center Pcb - Jandy AquaLink 40012 Manual De Instalación Y Operación

Jandy AquaLink Wireless Handheld Remote | Installation & Operation Manual
® ®
3.1

Transceiver J-Box Connection to Power Center PCB

Transceiver
J-Box
6' Min.
To Ground
Level
Low Voltage
Cable
Low Voltage Knockouts
with Heyco Fittings
1. Turn off all power to the power center.
2. Mount the transceiver J-Box at least 6' above the ground and 8'
from air blowers that may be nearby.
3. The transceiver J-Box antenna must point towards the sky.
4. Route the four conductor wire from J-Box through the Heyco
fi tting into the power center low voltage raceway.
5. Open the door to the power center and remove the dead panel.
6. Feed the four conductor wire into the power center through the
low volt age raceway.
7. Trim excess wire.
Low
Voltage
Raceway
High Voltage Raceway
Knockouts for Conduit
Blower or Other
Equipment
8' Min.
A
Bottom View
High Voltage
ENGLISH
Detail A
6"
¼ "
®
Page 9