Krups XP2280 Manual De Instrucciones página 48

Français
English
it back in place.
n Note the direction in which the pipe is inserted (fig.24)
5. DESCALING
The guarantee does not cover appliances which become faulty because they have not been descaled
regularly.
Descale your espresso machine using white vinegar (available from hardware stores) or a sachet of
commercial citric or sulfamic acid.
We recommend that you use the Krups descaling accessory, reference F054, available in Krups
authorised service centres. In addition to two descaling sachets, this accessory includes a water hard-
ness tape tester to assess the frequency with which your appliance should be descaled, in normal use.
The amount of scale depends on the hardness of the water but also the level of use.
The frequency of descaling given by the F054 accessory is therefore purely indicative.
DESCALING FREQUENCY
Av. number of Soft water
coffees per week (<19°th)
Less than 7 Once a year
From 7 to 20 Every 4 months
Over 20 Every 3 months
If in doubt, it is recommended to descale every month
DESCALING THE STEAM AND ESPRESSO CIRCUIT
n Empty the tank and put it back in place.
n If your appliance is fitted with our Claris - Aqua Filter System F088 cartridge, please remove this
cartridge before the descaling operation.
n Fill the tank with a mixture composed of three parts of water for one part of white vinegar or a mixture
of 1/2 litre of water and a sachet of commercial descaling agent.
n Insert the filter holder (without ground coffee) into the appliance and lock it by turning it to the right,
up to the stop.
n Place a container under the steam nozzle.
Espresso
n Press the . button. During the preheating of the appliance, the
n Once it becomes steady, turn the knob to
equivalent of a mug) and then turn the knob back to "0" position.
n Place a container of sufficient volume under the filter holder.
n When the LED becomes steady, press the
repeating this operation.
n Turn off the appliance by pressing the Espresso
n After 15 minutes, turn the appliance back on.
Espresso
n Press the button. During the preheating of the appliance, the
becomes steady, make the rest of the mixture run through into a container by pressing the
button several times.
RINSING
IMPORTANT !
After descaling, perform 2-3 rinsing operations with clean water (without es-
presso ground coffee), as described in paragraph 1 "Before first use".
Remember to rinse the steam circuit by following the instructions below:
n Place a container under the steam nozzle.
Espresso
n Press the button (fig.4).
88
Hard water Very hard water (
(19-30°th) 30°t)
Every 8 months Every 6 months
Every 3 months Every 2 months
Every 2 months Every month
Espresso
LED flashes.
position and let 100 ml of this mixture flow through (the
, button and let the water flow through before
button immediately after this second cycle.
Espresso
LED flashes. When it
Espresso
n Once the LED becomes steady, turn the knob to
through the nozzle and then turn it back to "0" position
n The appliance is descaled and ready to be used again.
6.GUARANTEE
n Your appliance is covered by guarantee but any connection or handling error or any use of the
appliance other than that described in these instructions renders the guarantee invalid.
n This product has been designed for domestic use only. Any commercial use, inappropriate use or
failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee
will not apply.
n No repair made because of a lack of descaling will be covered by the guarantee.
n If you have any problem or query please contact our Customer Relations Team first for expert help
and advice.
0845 330 6460 - UK
01 677 4003 - ROI
or consult our web site: www.krups.co.uk
7. TROUBLESHOOTING
Problems Possible causes
The espresso is not The cups and the filter
hot enough. holder are cold.
Espresso
The LED and
the pictograms
The knob has been turned
and flash and
to the position.
the appliance does
not work.
The filter holder is You forgot to unlock the
blocked filter.
The espresso ground coffee
is too fine, too oily or floury.
The flow rate depends on
the fineness of the coffee
The espresso flows used and can vary when
preparing the espresso
too slowly.
The filter holder is dirty.
The water drip-through grid
is clogged.The water drip-
through grid is clogged.
No water in the tank.
Tank poorly fitted.
The filter is clogged. The
espresso ground coffee is
The water does not
too fine.
run through.
Your device is scaled up.
The Claris cartridge has
been replaced but not
primed.
Français
English
position and let 100 ml of water flow
Solutions
Preheat the accessories: cups and filter holder
(see paragraph 6).
Turn the knob to the "0" position (fig.15).
Press the "OPEN" button lightly while turning the
filter holder to the left.
Choose a slightly coarser espresso ground
coffee
.
Clean your filter holder (see paragraph 4).
When the appliance has cooled, clean the
brewing head with a damp cloth. (fig.21).
Fill the tank.
Press down firmly on the tank.
Clean the filter holder (see paragraph 4) and try
a less fine espresso grind.
See paragraph 5.
See paragraph 1
89