Minimum Distance To Illuminated Surface; Minimum Distance To Normally Flammable Materials; Disposal; Manufacturer's Declarations - Cameo G4 T Serie Manual De Usuario

MINIMUM DISTANCE TO ILLUMINATED SURFACE

This symbol with distance specification in metres (m) indicates the minimum
distance between the light head and the illuminated surface. In this example,
0.5 m
the distance is 0.5 m. Please refer to the technical data in this manual and the
imprint on the unit casing for the value valid for this unit!

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS

This symbol with distance specification in metres (m) indicates the minimum
distance between the light head and normally flammable materials. In this ex-
0.5 m
ample, the distance is 0.5 m. Please refer to the technical data in this manual
for the value valid for this unit!

DISPOSAL

PACKAGING:
1. Packaging can be fed into the reusable material cycle using the usual disposal
methods.
2. Please separate the packaging in accordance with the disposal laws and recycling
regulations in your country.
DEVICE:
1. This appliance is subject to the European Directive on Waste Electrical and
Electronic Equipment as amended. WEEE Directive Waste Electrical and Electronic
Equipment. Old appliances do not belong in household waste. The old device must
be disposed of via an approved disposal company or a municipal disposal facility.
Please observe the applicable regulations in your country!
2. Observe all disposal laws and regulations applicable in your country.
3. As a private customer, you can obtain information on environmentally-friendly dis-
posal options from the seller of the product or the appropriate regional authorities.

MANUFACTURER'S DECLARATIONS

Manufacturer's warranty & limitation of liability
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu-Anspach / E-Mail [email protected] /
+49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at:
https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-CAMEO_DE_EN_ES_FR.pdf
In case of service, please contact your sales partner.
18