Idiomas disponibles
Idiomas disponibles
1. Place the camera between the front and rear
housings. (Figure A)
Note: Make sure the camera is properly
positioned, using the small top ledge as
an indicator.
2. Place the camera mount back into the spare tire
mount using the factory screws or (3) stainless
steel screws provided with the iBeam kit.
(Figure B)
3. Connect the wiring and reassemble the spare
tire mount back onto the tailgate following the
camera removal steps in reverse.
CAMERA ASSEMBLY
(Figure A)
(Figure B)
REV. 10/14/22 INSTAXPIO-JL1
9
