Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 95-6518B
Ram Trucks 2013-up
Modifications to factory radio cavity required for this installation
KIT FEATURES
• Double DIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio housing • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6523-NAV Chrysler interface 2013-up
Antenna Adapter: • 40-EU55 – amplified antenna adapter
METRA. The World's best kits.
APPLICATIONS
(without 8.4 inch touchscreen)
95-6518B
1-800-221-0932
Dash Disassembly
– Ram 1500/2500/3500 2013-up ........................... 2
– Ram Chassis Cab 3500/4500/5500 2013-up ....... 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket Wrench
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
Table of Contents
Tabla de contenido
loading

Resumen de contenidos para Metra Electronics 95-6518B

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-6518B APPLICATIONS Table of Contents Ram Trucks 2013-up (without 8.4 inch touchscreen) Dash Disassembly Modifications to factory radio cavity required for this installation 95-6518B – Ram 1500/2500/3500 2013-up ......2 – Ram Chassis Cab 3500/4500/5500 2013-up ..2...
  • Página 2: Dash Disassembly

    95-6518B Dash Disassembly 1. Remove liner inside tray at the top center of the dash and remove two torx screws. (Figure A) 2. Unsnap and remove radio panel. (Figure B) 3. Remove four screws and remove radio. (Figure C) 4. The factory rear support will need...
  • Página 3: Kit Assembly

    95-6518B Kit Assembly Double DIN radio provisions Note: For proper orientation, the Top of housing locating tabs on the Radio Housing are more to the top of the kit than bottom. (Figure A 1. Rotate the brackets into the radio housing. (Figure B) 2.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-6518B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Ram Trucks 2013 Y Mas

    INSTALLATION INSTRUCTIONS FOR PART 95-6518B APLICACIONES Índice Ram Trucks 2013 y mas (sin pantalla táctil de 8.4 pulgadas) Desmontaje del tablero Se requieren modificaciones a la cavidad del radio de fábrica para esta instalación. 95-6518B – Ram 1500/2500/3500 2013 y mas ...... 2 –...
  • Página 6: Desmontaje Del Tablero

    95-6518B Desmontaje del tablero 1. Quite el revestimiento interior de la charola en la parte superior central del tablero y quite los dos tornillos torx. (Figura A) 2. Suelte a presión y quite el panel del radio. (Figura B) 3. Quite los cuatro tornillos y quite el radio.
  • Página 7: Ensamble Del Kit

    95-6518B Ensamble del kit Provisión de radio doble DIN Parte superior de Nota: (Para una correcta la carcasa orientación, las pestañas localizadoras de la carcasa del radio están más cerca de la parte superior del kit que de la parte inferior).
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6518B EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...

Tabla de contenido