Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS
Dear Customer,
Thank you for choosing our product. You have mace an excellent choice in purchasing one of our
branded products. Our products are regularly inspected to ensure that they meet the desired high
quality standard and, of course, always comply with the stringent requirements of the European
Union.
READ THE SETUP INSTRUCTIONS. IMPORTANT INFORMATION INCLUDED. KEEP FOR
FUTURE USE!
Please read the instructions thoroughly and in their entirety before using the product for the first
time. Keep these instructions for future reference. Should you pass the product on in future, ensure
that you also include these instructions.
CAUTION! POTENTIAL DANGER!
Observe the safety information and setup instructions to avoid the risk of injury or damage to the
product.
RISK OF SUFFOCATION!
Keep small parts and packaging material out of the reach of children!
PRODUCT MODIFICATION
Never make modifications to the product! Modifications will invalidate the warranty and the
product may become unsafe or, in the worst case scenario, dangerous.
GENERAL NOTES
We recommend at least 2 people when assembling larger pieces of furniture.
basis.
Do not screw the screws in too tightly as the material may become damaged and cracks may
form.
ATTENTION! Keep small children away during assembly as there is a risk of injury!
To maintain its quality and also reduce the time and effort required for maintenance, we
recommend protecting the product from sun, rain and exposure to the elements. When not in
use, you should store your product in a dry and protected place. We recommend using a suitable
protective cover that allows sufficient air circulation to prevent waterlogging and mould.
Failure to carry out regular care and maintenance will significantly reduce the life of your product.
We cannot accept any liability for consequential damage resulting from lack of care and
Please note that the screws are first inserted by hand and then only
tightened slightly so that the screw is secure and the elements are
loosely connected. Do not tighten the screws until all elements are
connected in the correct way. Subsequent tightening of the screws can
compensate for minor discrepancies in drill holes or weld points that
can be present in hand-finished products.
Ensure that this product is fully assembled before use. Check that all
screws and bolts are securely tightened, and monitor this on a regular
4
EN
www.DEUBAXXL.de
