Idiomas disponibles
Idiomas disponibles
FEEDING
profifeed
CLEANING AND MAINTENANCE
In order to ensure a good continuity with the feeding, the profifeed
should be cleaned regularly during the season. Use a small brush to remove the dust and
feed residues from the profifeed
Band. The profifeed
end oils must not be used. The service life of the tension spring is increased by regular
greasing. In the event of inadequate or not performed maintenance, the guarantee claim
may expire.
WEAR PARTS
The profifeed
the clockwork and the conveyor belt. These are available as spare parts.
Wear parts are excluded from the guarantee.
Appropriate cleaning and care reduce wear and tear on the device.
REPAIR
Here you will find all the information you need to exchange spare and wear parts. Please
note and use the QR code under cleaning and maintenance.
STORAGE
If frost is expected, the device must be taken out of service and dismantled. First clean
the device as described under Cleaning and Maintenance. The device can be stored dry
or wet. If the device is to be stored dry, it is important that all components, including the
internal motor parts, are completely dry. If the pump is wet, put the cleaned pump in a
container filled with fresh tap water.
Make sure that the container is set up frost-free.
DISPOSAL
The device must be disposed of in accordance with national legal regulations. This device
must not be disposed of as domestic waste. Make the device unusable by cutting the
cable and dispose of it via the return system provided.
If the device contains light sources, these must be disposed of using the return system
provided for this purpose.
Ask your specialist dealer.
8
BeltFeeder
BeltFeeder Clock
Observe the relevant product videos on the subject of
cleaning and maintenance
Youtube channel:
https://www.youtube.com/user/FIAPGmbH
BeltFeeder
must be cleaned and oiled regularly. Wear parts include
BeltFeeder
and on the profifeed
must be regularly oiled with gun oil. Resin-
in our
GB
BeltFeeder
BeltFeeder
