Fiap profifeed BeltFeeder Instrucciones De Uso página 7

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
GB
FEEDING
All work with this device may only be carried out in accordance with these instructions.
The combination of water and electricity can lead to serious danger to life and limb if it is
not connected properly or handled improperly. Only operate the device when nobody is in
the water! Before reaching into the water, always unplug all devices in the water. Compa-
re the electrical data of the power supply with the type plate on the packaging or on the
device. Make sure that the device is protected by a residual current device with a rated
residual current of maximum 30 mA. Only operate the device from a properly installed
socket. Keep the power plug and all connection points dry! Lay the connection cable so
that it is protected to prevent damage. Only use cables, installations, adapters, extension
or connection cables with protective contact that are approved for outdoor use. Do not
carry or pull the device by the connecting cable! The device must not be operated if the
cable or housing is defective! If the power cord of the device is damaged, the device must
be disposed of; it is no longer possible to replace the power cord. If the cable is damaged,
the device must be disposed of. Electrical installations on garden ponds must comply with
international and national installation regulations. Never open the housing of the device or
its associated parts unless this is expressly stated in the instructions for use.
Never make technical changes to the device, this leads to the immediate expiry
of all warranty and guarantee claims. Use only original spare parts and accessories.
Have repairs carried out only by authorized customer service centers.
Never operate the device without water flowing through it! Never pump liquids
other than water!
For your own safety, contact a qualified electrician if you have any questions or problems!
INSTALLATION AND COMMISSIONING
The profifeed BeltFeeder, the original, has been the most frequently used automa-
BeltFeeder
tic feeder for years. The profifeed
is available in two sizes (capacity 3
kg and 5 kg) and with three different clockwork running times (4 hours, 12 hours and 24
hours). Numerous scientific studies have shown that the distribution of the daily ration
over as many feedings as possible is decisive for high feed conversion and the avoidance
of load peaks in terms of water quality. The profifeed BeltFeeder Standard is ideally sui-
ted for feeding fry, saplings and for dosing buffer substances or medicines. The housing
and the cover have excellent weather resistance and a long service life. The profifeed
BeltFeeder
is a MUST for every production company or hobby grower.
On the lower part of the profifeed BeltFeeder Standard there are 4 mounting brackets
for secure attachment.
7
loading