Idiomas disponibles
Idiomas disponibles
8. Close supervision is necessary when your appliance is being used near children or
infirm persons.
9. Do not place an appliance on or near a hot gas or on a heated oven.
10. Do not use outdoors (Household use only).
11. Do not operation the appliance while the Jar lid is not fixed onto the Jar
12. Do not remove the Jar lid while the appliance is in operation.
13. Do not put your hands into the Jar while the Jar fixed on the blender and the blender
connected to the supply.
14. Do not touch the cutting blades and do not insert any kind of object (knives, forks,
spoons etc.) into the cup while the product is operation. A spatula may be used only when
the product is not in operation, avoiding the risk of serious injury.
15. To avoid the risk of personal injury, this product should not be operated by children
or people who are not familiar with these instructions.
16. Never operate the product when the Jar is empty and do not remove the cup lid before
the blades come to a complete stop.
17. Save these instructions.
18. Don't misuse the appliance. Handle the blade with care: it is very sharp.
19. Always disconnect the blender from the supply if it is left unattended and before
assembling, disassembling or cleaning.
HOW TO USE THE APPLIANCE (REFER TO THE FIGURE)
USAGE OF THE BLENDER
1. Before inserting the Jar(C) to the housing, make sure the power cord is unplugged
from the power outlet and the knob is in "0" position.
2. On a work surface, remove the Cap(A) from the Jar lid(B) by turning the Cap(A)
counterclockwise and fix it by turning the Cap(A) clockwise
3. When set the Jar lid(B) onto the Jar(C) , tilt the Jar lid to the handles of the Jar and
inset it to the Jar , then press down it to impact into the Jar.
4. When set the Speed selector (F) to "2"position through turning it clockwise, it means
high speed.
5. When set the Speed selector (F) to "1"position through turning it clockwise, it means
low speed.
6. Turn the Jar(C) clockwise and remove it from the Base (E). Turn the Jar (C)
counterclockwise and fix it on the base.
7. Wash ingredients well and cut into suitable piles to fit into the feeding hole. Add the
foods or beverages into the Jar(C) through feeding hole. The Jar(C) has a capacity of 1.7
liters. Do not overload the Jar (C) at a time; NEVER RUN EMPTY THIS MAY BURN THE
MOTOR.
8. Turn the Speed selector (F) to "1" or "2" position and within repeat the operation until
desired results are reached.
9. The pulse level gives you fingertip control over short food processing jobs, when turn
the Speed selector (F) to pulse, the machine will run at high speed.
- 7 -
