Thinkcar THINKSCAN Max Manual De Instrucciones página 25

THINKSCAN Max
www.mythinkcar.com
In order to prevent the car from being used by illegal keys, the car's anti-theft matching
function enables the car's immobilizer control system to identify and authorize the remote
control key before the car can be turned on and used normally. In addition, when replacing
the ignition key, ignition switch, instrument cluster, engine control unit (ECU), body control
module (BCM), and remote control battery, it is necessary to match the anti-theft key.
5.2.9 Nozzle coding
Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the
code corresponding to the fuel nozzle of each cylinder, so that the fuel injection amount of
each cylinder can be controlled or corrected more accurately. Usually after replacing the
ECU and the fuel injector, the coding of each cylinder fuel nozzle needs to be confi rmed or
recoded, thus the cylinder can better identify the fuel injector of each cylinder and control
the fuel injection accurately.
5.2.10 Tire pressure reset
When the car tire pressure fault indicator light is on, this function is to reset the tire
pressure and turn off the tire pressure fault indicator.
If the tire pressure is too low or leaks, replace or install tire pressure monitoring equipment,
and replace the tire. When the vehicle with a damaged tire pressure sensor and tire
pressure monitoring function has rotated its tires, the tire pressure reset must be carried
out after maintenance.
5.2.11 Suspension level calibration
This function can adjust the vehicle body height. When replacing the vehicle height sensor
or control module in the air suspension system or the vehicle level is wrong, this function
can adjust the vehicle height sensor for level calibration.
5.2.12 Headlight matching
This function can initialize the adaptive headlight system. This system can decide whether
to automatically turn on the headlights based on the ambient light intensity, monitor the
vehicle's driving speed, body posture, etc., and adjust the headlight lighting angle timely.
5.2.13 Gearbox matching
This function can complete the self-learning of the gearbox and improve the shift quality.
When the gearbox is disassembled or repaired (after some batteries are powered off ), it
will cause shifting delay or car impact. At this time, this function is to make the gearbox
automatically compensate according to driving conditions, thus achieve more comfortable,
more ideal shift quality.
5.2.14 Sunroof initialization
23