Oster OS-ELB20VTCW Manual De Instrucciones página 38

Idiomas disponibles

Idiomas disponibles

C L E AN A N D MA IN TENA N CE
Before each operation, disconnect the cooker from the electricity. To assure the long life
of the cooker, it shall thoroughly cleaned frequently, keeping mind that:
1. Wait until the oven has cooled before removing the wire shelves, wash them separate-
ly in warm soapy water and dry thoroughly.
2. Wash the interior of the oven with hot soapy water and wipe down with a damp cloth.
3. Leave the door open until the interior has dried, before replacing the wire shelves.
4. Clean the oven after eachuse, especially after roasting or grilling, this will prevent split
or splattered food debris burning and becoming difficult to remove.
5. Do not use abrasive pads to clean the interior of the oven as this may remove the
enamel, which will affect the efficiency of your oven.
6. Do not use harsh, abrasive cleaners or sharp metal scrapers to clean the oven door
glass since they can scratch the surface, which may result shattering of the glass.
Cleaning the outside of the oven
1. You should regularly wipe over the control panel, oven door and over sides using a
soft cloth and mild liquid detergent as spilt liquids may damage the enamel.
2. Wash enameled or chrome plated parts of the oven with warm soapy water or with
non-abrasive detergents.
3. Never use abrasive pads to clean enameled, chromed or stainless steel surfaces.
4. When using commercially available stainless steel cleaning products avoid cleaning
any lettering or symbols, as they can become damaged.
Removing the door for easier cleaning
We recommend you have someone to assist you during removal of the door.
1. Open the completely.
2. The door hinge has a small latch. Lift the latch on both hinges.
3. Lift the door slightly as if closing, and then with both hands supporting the door, pull it
away from the oven.
4. To replace the door, hold the door in an open position and insert the larches on both
hinges back into place. Open and close the door to make sure that it has been fitted
correctly.
English-16
loading