Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY AND USE INSTRUCTIONS
While operating pneumatic tools you should consider
basic safety precautions in order to avoid personal injury
and equipment damage.
Always read the safety, operating and maintenance
instructions before you start using your appliance. Keep
the instruction manual for future reference.
General
It is your responsibility to follow these preventive measures to
ensure your own safety. Always operate the pneumatic drill
carefully and responsibly. In using the appliance, you accept full
responsibility for any accidents caused to third parties or their
goods during its use.
The pneumatic drill may only be used by people who have read
the instruction manual and are familiar with its handling. Before
operating the pneumatic drill for the first time, users should be
instructed by the seller or any other qualified person on how to
use it. Users must ensure they are instructed adequately and
practically.
The instruction manual is considered an integral part of the
apparatus and must always be made available alongside the
product.
Familiarise
yourself
accessories/equipment coupled to the pneumatic drill. The user
must know how to quickly stop the compressor or cut off the
compressed air supply.
Stay alert and use common sense while operating a pneumatic
tool. A moment of inattention can result in serious injury.
Do not operate the pneumatic drill if you are not both physically
and mentally well. Do not operate it while you are tired or under
the influence of medication, drugs or alcohol. If you have a
health problem, ask your doctor if it is safe for you to use the
pneumatic drill before doing so.
Never allow the pneumatic drill to be operated by children,
individuals with limited physical, sensory or mental abilities,
individuals with lack of experience and knowledge of the
appliance, or others unfamiliar with the use instructions.
22
with
the
compressed
Do not overload the appliance, it runs better and efficiently
within its limits indicated in the technical data table.
Use it properly for each type of work. Using this appliance for
purposes other than the intended may result in hazardous
situations.
The pneumatic drill may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to the
pneumatic tool, is not permitted.
For safety reasons, any alteration to the pneumatic drill other
than installing accessories specifically authorized by the
manufacturer, is prohibited. The warranty on your pneumatic
drill will be voided if you alter it in any way.
You may get information on authorized accessories from your
official VITO dealer.
Before you start operating
Individuals who have not read the instruction manual and are
not familiarized with how to operate the pneumatic drill must
not use it.
To ensure that you work with the pneumatic tool safely, you
should take into account a few precautions and procedures
before start-up:
air
▪ Check that the pressure of the compressed air line complies
with the technical specifications of the appliance;
▪ Inspect the pneumatic drill before each use. Check that the
attachments are installed correctly and are in good
condition. In case there is excessive damage or wear, replace
them.
▪ Check that all bolts are properly tightened.
inspection is important to ensure the safety issues and good
performances of the pneumatic tool;
▪ Remove any adjusting key or wrench before turning the
pneumatic tool on. A wrench or a key left attached to a
rotating part may result in personal injury.
▪ After the assembling the attachments and before using the
air tool, test it at full speed with no load for a while. Check
for moving parts misalignment or any other condition that
may affect the pneumatic drill operation. Check that all
moving parts run smoothly, without abnormal noises;
Regular
