Sony PFM-50C1 Manual De Instrucciones página 86

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 210
Adjusting the Picture
Color Temp.
You can also set the color temperature. You can select
Cool, Neutral or Warm, or adjust each gain more
precisely. Up to three adjusted color temperatures can
be registered. You can rename them (up to six
characters in length).
1
Select "Color Temp." with M/m and press
ENTER.
2
Select the color temperature with M/m and press
ENTER.
Cool: to set the color temperature to high
Neutral: to set the color temperature to neutral
Warm: to set the color temperature to low
User1 – 3: to set the gain more precisely
When you select Warm, Neutral or Cool, the
menu returns to the Adjust Picture menu.
When you select "User1" to "User3"
When you select "User1" to "User3", the
following menu appears on the display panel.
P i c t u r e / S o u n d
A d j u s t
P i c t u r e ( U s e r 1 )
C o l o r
T e m p .
R e d
G a i n
G r e e n
G a i n
B l u e
G a i n
N a m e
S e t
,
t o
s e l e c t ,
s e t
(1) Press M/m to move the cursor (yellow) to the
gain item that you want to set and press
ENTER.
The following menu appears on the display
panel.
R e d
G a i n
32
(GB)
C o n t r o l
:
U s e r 1
,
t o
ENTER
0 0
(2) Adjust the gain (0 to 255) with M/m/</,
and press ENTER.
The menu returns to the Color Temp. menu.
When you rename the adjusted color temperature,
follow the steps below.
(3) Press M/m to move the cursor (yellow) to
"Name Set" and press ENTER.
The following menu appears on the display
panel.
P i c t u r e / S o u n d
A d j u s t
P i c t u r e ( U s e r 1 )
C o l o r
T e m p .
N a m e
0 1 2 3 4 5 6 7 8 9 A B C D E F G H
I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h
s t u v w x y z ( ) [ ] < > + –
= %
& ; : . ' ,
,
,
,
s e t
Character list
(4) Select a character or symbol in the character
list with M/m/</, and press ENTER. The
selected character is input. If you make a
mistake, select [<] on the screen to
backspace the cursor one character, then
correct the error.
When [MENU Function] (page 23 (GB)) on the
Initial Setup menu has been set to [Return], the M/
m buttons on the Remote Commander move the
cursor left and right. To make the M/m buttons
move the cursor up and down, set [MENU
Function] to [On/Off].
(5) Repeat steps (4) and after you have finished
entering the name, select "end" and press
ENTER.
The menu returns to the Color Temp menu.
C o n t r o l
:
U s e r 1
S e t
i
j k l m n o p q r
/
E n d
t o
s e l e c t ,
t o
ENTER
Tabla de contenido
loading

Este manual también es adecuado para:

Pfm-50c1e

Tabla de contenido