Idiomas disponibles
Idiomas disponibles
Problem
The suction effect is insufficient.
Troubleshooting
Cause
The suction power on the dust extrac-
tor is too low.
The drywall sander's speed is too high.
The internal dust extraction on the
drywall sander is too low.
The joint compound material has a high
proportion of compound or is very soft.
The main filter on the dust extractor is
blocked/jammed.
A fleece dust bag is being used.
The extraction hose is blocked or
twisted.
The dust extractor's dust container
is full.
-20-
Corrective Action
Increase the suction power on the dust
extractor.
Reduce the speed.
Reduce the suction power or switch to
external dust extraction.
Switch on the external dust extraction,
set the suction power thumbwheel to
setting 6 and, in extreme cases, reduce
the speed.
Clean the filter element regularly:
Option 1: Set the suction power regu-
lation to the maximum suction power.
Seal the nozzle, extraction hose or in-
take port on the dust extractor with the
palm of your hand for 10 seconds until
the automatic cleaning starts.
Option 2: Clean the filter element me-
chanically (extraction).
Option 3: Check the filter element for
damage and blockages. Insert a new
filter element regularly.
Use a waste disposal dust bag.
Remove the blockage or untwist the
hose.
Empty the dust extractor's dust
container.
