Idiomas disponibles
Idiomas disponibles
6. Tighten all M10-1.25 CL8.8 fasteners with torque wrench to 42 Lb.-Ft. (57 N*M) and 7/16-14 fasteners to 50 Lb-ft. (68 N*M)
Proper torque is needed to keep the hitch secure to the vehicle
when towing.
7. Trim fascia –Locate the center of the fascia. Using a tape measure, marker, and utility knife, cut a notch in the bottom of fascia approximately 4'' wide by 3-5/8" tall.
See Figure 3. Note: Be sure area is clear of all electrical wiring before trimming.
C
L
3-5/8"
Area to trim
4"
Figure 3
Bottom View Fascia
©2022 Horizon Global™ Corp - Printed in Mexico
Sheet 8 of 27
76597NP
6/15/22
Rev. A
