Idiomas disponibles

Idiomas disponibles

Website: www. horizonglobal.com
Technical Assistance: 800-632-3290
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2043 kg)
Weight Distributing
4500 lb. (2043 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico
Installation Instructions
PART NUMBERS: 76023, 84023
Max Tongue
Weight
Weight
675 lb. (306 kg)
675 lb. (306 kg)
CQT76023
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
1.
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 24
Scan for safe
towing tip, or visit
http://www.horizo
nglobal.com/
76023NP
02-22-19
Rev. B
Tabla de contenido
loading

Resumen de contenidos para Horizon Global 76023

  • Página 1 Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this Warranty. brakes and DO NOT speed up. Rev 9/2014 ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 1 of 24 76023NP 02-22-19...
  • Página 2: Installation Instructions

    Weight Carrying 4500 lb. (2043 kg) 675 lb. (306 kg) Weight Distributing 4500 lb. (2043 kg) 675 lb. (306 kg) Hitch Illustration ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 2 of 24 76023NP 02-22-19 Rev. B...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 3 of 24...
  • Página 4 (2) bolts behind it with 7 mm socket each side, see Figure 4. Gently remove the fascia and attachment straps behind wheel well liner. Unplug the wiring on driver side if present. Carefully set the fascia and straps aside for reinstallation. ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 24...
  • Página 5 7. Fascia door can be trimmed 1.5’’ tall by 3.0’’ wide and reinstalled as shown in Figure 5. Get customer approval before trimming the fascia door 3.0’’ ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 24 76023NP 07-07-16 Rev.
  • Página 6 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 24...
  • Página 7 7 mm socket to remove (1) bolt, each side. Gently pull off the upper wheel well body trim piece and remove (1) bolt behind it with a 7 mm socket each side, see Figure Gently remove the fascia and unplug the wiring on driver side if present. Carefully set the fascia aside for reinstallation. ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 7 of 24...
  • Página 8 6. Reinstall all fasteners and fascia removed in Step 1,2. 7. Fascia door to be trimmed as shown in Figure 5. Get customer approval before trimming fascia. ©2016, 2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 8 of 24 76023NP 02-22-19 Rev.
  • Página 9: Garantie À Vie Limitée

    Les cours de l’État situées dans le comté d’Oakland, Michigan, constituent les autorités judiciaires exclusives relativement à tout litige relevant de cette Garantie. Rev 9/2014 ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 9 de 24 76023NP 02-22-19 Rev.
  • Página 10 4500 lb. (2043 kg) 675 lb. (306 kg) de charge Répartition de charge 4500 lb. (2043 kg) 675 lb. (306 kg) Illustration de l'attelage ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 10 de 24 76023NP 02-22-19 Rev. B...
  • Página 11 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique...
  • Página 12 Débrancher le câblage sur le côté conducteur, s'il est présent. Poser délicatement le carénage et les sangles en retrait pour la réinstallation. ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 12 de 24...
  • Página 13 7. Il est possible de découper la porte de carénage à 1,5 po de hauteur par 3,0 po de largeur, et de la réinstaller come illustré dans la Figure 5. Il faut obtenir l'approbation du client avant de découper la porte de carénage. 3.0’’ ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 13 de 24 76023NP 02-22-19...
  • Página 14 Ne jamais utiliser une torche pour découper un accès ou un trou de fixation. Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 14 de 24...
  • Página 15 (1) boulon derrière celle-ci avec une douille 7 mm, de chaque côté, voir Figure 3. Retirer avec soin le carénage et débrancher le câblage côté conducteur s’il est présent. Mettre avec soin le carénage de côté pour réinstallation. ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 15 de 24...
  • Página 16 7. Il est possible de découper la porte de carénage à 1,5 po de hauteur par 3,0 po de largeur, et de la réinstaller come illustré dans la Figure 5. Il faut obtenir l'approbation du client avant de découper la porte de carénage ©2016, 2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 16 de 24 76023NP 02-22-19 Rev.
  • Página 17: Garantía Limitada De Por Vida

    Oakland, Michigan tendrán la jurisdicción exclusiva para cualquier disputa que aumente la velocidad. surja con respecto a esta garantía. Rev 9/2014 ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 17 de 24 76023NP 02-22-19...
  • Página 18: Aplicaciones

    4500 lb. (2043 kg) 675 lb. (306 kg) Distribución de peso 4500 lb. (2043 kg) 675 lb. (306 kg) Ilustración del enganche ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 18 de 24 76023NP 02-22-19 Rev. B...
  • Página 19 No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 19 de 24...
  • Página 20 Desconectar el cableado del lado del conductor si está presente Con cuidado, colocar la fascia y las correas a un lado para reinstalación. ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 20 de 24...
  • Página 21 7. La puerta de la fascia se puede recortar 1.5'' de alto por 3.0'' de ancho y reinstalarse como se muestra en la Figura 5. Obtener la aprobación del cliente antes de recortar la puerta de la fascia 3.0’’ ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 21 de 24 76023NP 02-22-19 Rev.
  • Página 22 No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 22 de 24...
  • Página 23 (1) perno detrás de esta con un cubo de 7 mm de cada lado, ver la Figura 3. Quitar suavemente la fascia y desconectar el cableado en el lado del conductor, si está presente. Con cuidado, colocar la fascia a un lado para reinstalación. ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 23 de 24...
  • Página 24 7. La puerta de la fascia debe recortarse como se muestra en la Figura 5. Obtener la aprobación del cliente antes de recortar la fascia. ©2016, 2019 Horizon Global Americas Inc. - Impreso en México Hoja 24 de 24 76023NP 02-22-19 Rev.

Este manual también es adecuado para:

84023Cqt76023

Tabla de contenido