Idiomas disponibles
Idiomas disponibles
ASSEMBLY
1. Lay out all the contents and ensure there are no
missing/damaged parts (Fig. 1).
Figure 1
2. Assemble drawers to seat cushion base with M6 Round head
inner hexagon screw(7) and M6 Lock nut(8). Assemble the
remaining three screws and tighten all. ( Fig. 3)
Figure 2
08
Figure 3
3. Using one of the support leg(4),
align the 3 holes in the support
leg with the holes of the
Underseat storage base(5), using
M6 Round head inner hexagon
screw(7) and M6 Lock nut(8).
Hand tighten the screws (Leave
all screws loose until completely
assembled). (Fig. 4)
4. Assemble the remaining three
support legs(4) to the Underseat
storage base(5) and hand tighten.
(Fig. 5)
5. Align the 2 holes in the support
leg with the holes of the seat
cushion base which is completed
in Figure 3. Using M6 Round head
inner hexagon screw(7) and M6
Lock nut(8) and hand tighten.
(Fig. 6)
Figure 4
Figure 5
Figure 6
09
