Idiomas disponibles
Idiomas disponibles
How to use the remote control
ON/ OFF Key - used for turning on/off the fan.
Speed plus key - For increasing the speed of the fan; Long press
this icon for Booster setting, will go back to high speed after
operating for 5 minutes.
Speed decrease key - For decreasing the speed of the fan.
Light key - used for turning on/off the light
Gesture control
Gesture sensor
In standby state, gesture from left to right means increase the speed. Gesture from right
to left means decrease the speed. The 1st gesture from left to right into the low speed,
the corresponding indicator light is on; keep gesturing from left to right, the speed will
go into Medium speed - High speed - Booster speed (automatically jumps back to third
gear after running for 5 minutes).
When the motor is running, the 1st gesture from right to left enters the function of quick
timer (automatically turn off after running for 5 minutes), the digital blinking on the
display. Gesturing one more time from right to left, the hood will be turned OFF. In
standby state, the gesture switch from right to left does not respond.
STAINLESS STEEL SURFACES CLEANING
To avoid damaging the stainless steel surface of your appliance
Always clean with:
Soft cloths, distilled or filtered water, as well as detergents specially made for stainless steel.
Do not clean with:
Abrasive materials, cleaning powders, bleach and other chlorine-based products, ammonia-
containing glass cleaners, tap water especially if it tends to be hard water, oven cleaners.
Damage to stainless steel surfaces due to the use of improper cleaning substances is not
covered by the warranty.
Display screen
Gesture sensor
