cecotec conga 8090 ULTRA Manual De Instrucciones página 44

ENGLISH
- Create an account with your e-mail and a password.
- Confirm login.
- Add your Conga robot.
- Connect to Wi-Fi.
Warnings
- The Wi-Fi name and password cannot exceed 32 bits.
- If the network configuration fails to connect, follow the below steps:
- Press the power button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi
light indicator will blink fast indicating connection error. Retry connecting the robot again
following the steps in the before section.
- If the connection fails again, check if:
- The robot is too far away from the router.
- The Wi-Fi password is incorrect.
The following modes can be activated from the App
Automatic mode
- Select this mode for the robot fo clean 4x4 m quadrants. Within this space, it will carry
out a first cleaning cycle in Edge mode and then in zigzag motion to complete the surface.
Once it has finished, it will directly return to the charging base.
- It can be activated from the App or the remote control.
Note
The robot could leave the room to complete the cleaning cycle in some of the quadrants. This
will not affect the robot's operating, do not worry.
Edge mode
- Select this mode for the robot to clean along walls and furniture.
- It can be activated from the App or the remote control.
Spiral mode
- When this mode is selected, the robot will start cleaning in a specific point, by moving in an
outward spiral motion and then returning to the starting point in an inward spiral motion
at maximum power. Then, it will return directly to the charging base.
- It can only be activated from the App.
Scrubbing mode
- When this mode is activated, the robot moves in a swaying motion, simulating real
scrubbing moves. It starts off cleaning in Edge mode, then in zigzag motion and finally
returns to the charging base taking the straightest way back home.
- It can only be activated from the App.
44