Tabla de contenido
ENGLISH
CARE OF CASSETTE MECHANISM
Gently clean the tape head and pinch wheel/capstan assemblies after every 10
hours of using the unit. A range of cassette care products are available.
The erase head and record/play head and the surface of the pinch roller are
delicate and must not be touched with metal objects such as screwdrivers. You
may find it easier to clean the assembly by pressing the PLAY button to bright
head and pinch roller into view. Be sure to press the STOP button after cleaning
the mechanism.
Damage to the pinch wheel can occur if the unit is left in PLAY mode with the
power switch off. Under no circumstances should you attempt to lubricate any part of the machine.
USING THE CD/MP3
LOADING A DISC
1. Set the FUNCTION switch to CD/MP3/USB position.
2. Open the CD door. " OP " will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door.
The total number of tracks will appear on the display after several seconds.
5. To remove the CD, press to open CD compartment lid, grasp the CD by its edges,
and carefully take it out.
Note:
To ensure good system performance; wait until the disc tray completely reads
the disc before proceeding.
If no disc is loaded into the compartment, or the disc is placed upside down,
the display will show N0d.
PLAYING A DISC
1. Press the PLAY/PAUSE/USB button to start playback.
The playback starts from track 1, the "
To interrupt playback, press the PLAY/PAUSE/USB button. The "
and the current track will flash on the display.
To resume playback, press the PLAY/PAUSE/USB button again.
2. To stop playback, press the STOP button, the total number of tracks appears on
the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
12
" indicator is shown on the display.
7
CMP 574USB
" indicator
Tabla de contenido
