Operation - cecotec 3D ForceAnodized 550 Manual De Instrucciones

ENGLISH

4. OPERATION

Setting temperature
1. Turn the temperature knob to select the temperature indicated on the clothing label.
LABEL
••
•••
2.Connect the power cord to a power supply. The light indicator will turn on blue.
3.When the light indicator switches from blue to red, the iron is ready to be used.
Water tank filling
1. Unplug the iron before filling the water tank.
2. Hold the steam iron in horizontal position.
3. Slowly pour water through the water inlet. Do not exceed the Max. mark on the water tank in
order to avoid water from spilling.
4. Close the fill opening while operating the iron.
5. Empty the water tank after each use.
Note: the steam iron is designed to use tap water. However, if the water is very hard, it is
advisable to use distilled water.
Note: do not use chemically descaled or perfumed water.
Spraying
• As long as there is enough water in the water tank, you may use the spray button at any
temperature setting during steam or dry ironing.
Steam ironing
1. With the unit unplugged, fill the steam iron with water.
2. Stand the steam iron on its heel rest in an upright position on an iron-safe surface and connect it to
the power supply.
3. Set the temperature knob to the "••" or "•••" position.
4. Set the steam knob to the desired position.
5. When finished, turn the temperature knob anticlockwise to the minimum position and unplug the
appliance from the power supply.
12 3D FORCEANODIZED 550
•
TYPE OF TEXTILE
Do not iron this article
Synthetics, nylon, acrylics, polyester, rayon
Wool, silk
Cotton, linen
Maximum temperature (Steam)