Idiomas disponibles
Idiomas disponibles
T
1.
2.
R
3.
4.
R
IMPORTANT:
Cleaning the Airvolution separation unit
This cleaner uses the Airvolution separation system, unique to Hoover. If necessary the
Airvolution separation unit can be removed from the dust container and cleaned.
1.
Remove dust container from the cleaner by releasing the container carry handle to detach
the dust container from the main cleaner and pull upward to remove. [15]
2.
container. [22]
3.
Using the dust container handle lift the dust container upper section containing the
separation unit from the lower section. [23]
4.
Use a cloth to remove excessive dust from the separation unit's surface.
5.
Reassemble the dust container upper section. Push clips back to fully close the dust
container. [25]
6.
R
down until the latch connects with the main body of the cleaner. Once correctly retained
Removing a blockage
1.
Check if the dust container is full. If so refer to 'Emptying the dust container' .
2.
If the dust container is empty but suction is still low:
A.
B.
Check if there is any other blockage in the system - Use a rod or pole to remove any
C.
C
D.
Check if the separation unit needs to be cleaned. Refer to 'Cleaning the separation
unit' .
XarionFilterPro_union_pp.indd 3
[19]
[20]
[21]
[24]
If so refer to 'C
USER CHECKLIST
Should you have a problem with the product, complete this simple user checklist before calling
your local Hoover service.
Remove
•
Is there a working electricity supply to the cleaner? Please check with another electrical
appliance.
•
Is the dust container over- lled? Please refer to 'Cleaner Maintenance' .
•
Is the lter blocked? Please refer to 'Cleaner Maintenance' .
•
Is the hose or nozzle blocked? Please refer to 'Removing a blockage' from the system.
•
Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically
reset.
IMPORTANT INFORMATION
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover
dealer or direct from Hoover. When ordering parts always quote your model number.
Consumables:
•
Hepa Pre-Motor Filter: S104 - 35600990
•
Hepa Exhaust Filter Door: T101 - 35600991
Spares:
•
Flexible Hose: D121 - 35601070
•
Carpet & Floor Nozzle: G99 - 35600879
•
Parquet Caresse Nozzle: G97 - 35600868
•
Miniturbo Nozzle Allergen Remover with Silver Ion Technology: J25B - 35600929
•
Grand Turbo Nozzle: J24 - 35600978
Hoover Service
Should you require service at any time, please contact your local Hoover Service O
Quality, Safety and the Environment
Safety
believe that independent approval is the best way of demonstrating safety in design and
manufacture. The British Electrotechnical Approvals Board (BEAB), the independent UK national
authority for the safety of domestic electrical appliances, ensures that European safety standards
are met and maintained throughout the production life of an appliance. All appliances that pass
the requirements are permitted to carry the BEAB mark of safety.
3
GB
28-04-2010 16:29:49
