refrigerator after more than 1 hour of standing, so as to ensure its normal operation.
2.
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3.
Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside
the freezer compartment drops obviously, it indicates the refrigeration system is working normally.
4.
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled
according to the user's temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3
hours to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully
cooled(Try to open the refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage
circuit breaker are normal.If vibration noises are produced due to the refrigerator contacting the wall or if the wall
gets blackened by air convection around the compressor, move the refrigerator away from the wall. Setting up
the refrigerator may cause jamming noise or image chaos to the mobile phone, fixed-line telephone, radio
receiver, television set surrounding it, so try to keep the refrigerator as far away as possible in such case.
III.
Functions
The display panel is designed on the fridge door, illustrated as the right figure.
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the display panel gets illuminated
for 2s, and the system runs in the Smart mode by default. When all the doors are close, the display gets extinguished
automatically if no key operation within 3 minutes. When the display is off, it will light up if any door is opened or any key is
pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display. (refer to 1.6
for unlocking the keys)
1.Functions
1.1Temp. setting
1）Fridge temperature setting
Press the Temp. Zone key to select the fridge zone, with the corresponding icon flickering, and then press the Temp.key to
adjust the temperature, finally press the OK/Lock or wait for 5s to validate the above temperature setting.
The fridge temperature setting cycles as following:
5→6→7→8→OF→2→3→4→5；
OF refers to Fridge Off, and when OF takes effect, the fridge will stop cooling.
Take foods out of the fridge compartment before setting this function.
2）Freezer temperature setting
Press the Temp. Zone key to select the freezer zone, with the corresponding icon flickering, and then press the Temp.key
to adjust the temperature, finally press the OK/Lock or wait for 5s to validate the above temperature setting.
The freezer temperature setting cycles as following:
-18→-17→-16→-24→-23→-22→-21→-20→-19→-18；
1.2LECO
1）When the refrigerator is powered on, the LECO net flavor function will run automatically on a regular basis, lasting for
20 minutes each time; the LECO system decomposes odors and microorganisms into CO2 and H2O. At the same time,
the LECO system releases free radicals to actively eliminate bacteria, creating a cleaner cooling space.
2）Enabling the LECO function manually
u
Press the Function key to select LECO until the icon of LECO gets flickering, and then press the OK/Lock key for
confirmation. If the OK/Lock key is not pressed within 5s, the current setting will be invalidated.
EN
