Idiomas disponibles
Idiomas disponibles
INSTALLATION - OPERATING THE PRODUCT
DESCRIPTION
The PNEUMATIC PULLING RING SHARPENER enables the pulling rings' tips to be cut off, thereby avoiding the complica-
ted and time-consuming, one-by-one, ring-grinding process. Each pulling ring can be sharpened up to 8 times.
The PNEUMATIC PULLING RING SHARPENER is only designed for sharpening straight pulling rings (P.N.
050648).
Each ring must be sharpened individually.
Twisted, damaged rings should not be introduced into the appliance.
TECHNICAL CHARACTERISTICS
Machine weight
Max. air-network pressure
Max. punching force
ADJUSTING THE RINGS' HEIGHT
1.) Turn the star washer to the desired position to
adjust the ring's cutting height.
2.) On the back of the sharpener, a ruler allows
you to see the height of the ring depending on the
position of the star washer.
3.) The '0' position indicates a new ring.
Position 8 means that the ring has been cut to the
maximum.
POSITIONING THE PULLING RINGS FOR SHARPENING
1
2
PNEUMATIC PULLING RING SHARPENER
1.4 kg
(3.09 lbs)
7 bar
(101.5 Psi)
1400 daN
1
2
Connect the device to the compressed-air
network (7 bar).
Set the star washer to the desired position (1
- 8).
EN
3
9
