Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Light Kit (continued)
3
Installing the glass shade
WARNING: Do not overtighten when installing the glass shade
into the light kit. Allow the glass shade to cool completely before
removing.
□
With the power off, install the two LED bulbs (H) by screwing
them into the light bulb sockets.
□
Place the glass shade (I) into the light kit assembly, aligning
the three flat areas on the top flange of the glass shade (I)
with the three raised dimples in the light kit assembly. Turn
the glass shade (I) clockwise until it stops.
□
Attach the pull chain extensions (GG) to the light pull chain
and the fan pull chain.
Operating Your Fan
Turn on the power and check the operation of the fan. The pull chain
controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - Off
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of
the blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
I
GG
XX
XX
12
H
A. Warm weather
B. Cool weather
