Steinberg Systems SBS-SEM-250 Manual De Instrucciones página 19

The term "unit" or "product" in the warnings and in the description of the instructions
refers to the SEALING MACHINE
The product is outside the scope of the MDD 93/42/EEC regulations for medical
products. It is not a medical unit and may not be used for examinations and tests in
hospitals and medical centers.
2.1.
a) The plug of this unit must fit into the outlet. Do not modify the plug in any way.
Original plugs and matching outlets reduce the risk of electric shock.
b) Do not touch the unit with wet or damp hands.
c) Do not use the cord in an unintended manner. Never use it to carry the unit or
to pull the plug out of the socket. Keep the cord away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cords increase the risk of
electric shock.
d) If you cannot avoid using the unit in a wet environment, use a residual current
unit (RCD). Using an RCD reduces the risk of electric shock.
e) Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
f) To avoid electric shock, do not immerse the cable, plug, or unit itself in water
or other liquid. Do not use the unit on wet surfaces.
g) CAUTION - THREAT TO LIFE! When cleaning or using the unit, never immerse it
in water or other liquids.
h) Do not use the unit in rooms with very high humidity / in the immediate vicinity
of water tanks!
i) Do not allow the machine to get wet. Risk of electric shock!
2.2.
a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b) Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c) If you find any damage or irregularities in the operation of the unit,
immediately turn it off and report it to an authorized person.
Electrical safety
Safety in the workplace