Craftsman CMCE010 Manual De Instructiones página 5

Idiomas disponibles

Idiomas disponibles


WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
Intended Use
This fan is intended for household use
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Important Safety Instructions
WARNING !

precautions should always be followed, including the
following:
a ) Read all the instructions before using the fan.
b ) To reduce the risk of injury, close supervision is
necessary when a fan is used near children.
c ) Turn the fan off, disconnect from power source and
remove the battery packs when not in use and before
servicing or cleaning.
d ) Do not operate any fan after it malfunctions or is
dropped or damaged in any manner. Turn the fan
off, disconnect from power source and remove the
battery pack. Return fan to the nearest authorized
service facility for examination, repair, or electrical or
mechanical adjustment.
e ) To reduce the risk of electrical shock, do not put
fan in water or other liquid. Do not place or store fan
where it can fall or be pulled into a tub or sink.
f ) Only use attachments recommended or sold by
the manufacturer.
SAVE THESE INSTRUCTIONS
When using the fan, basic
Specific Safety Rules for Fans

WARNING: Fire hazard. Do not operate fan
near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes causing
personal injury.
The fan is designed to operate from a CRAFTSMAN
V20 battery.
For indoor use only.
Do not use around hazardous location/fumes/fine dust/
flammable materials.
Do not blow towards operator in dusty environment
Do not wash fan with water or allow water to get inside the
fan. Do not submerge fan in water at any time.
While fan is in use, do not cover with cloth or other
flammable materials due to increased risk of fire.
Store the fan indoors when not in use.
Additional Safety Information

WARNING: Never modify the power tool or any part of
it. Damage or personal injury could result.

WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratory protection.

WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
lead from lead‑based paints,
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from
chemically‑treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of
harmful chemicals. Direct particles away from face and body.
Use clamps or other practical ways to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable and may
lead to loss of control and injury.
Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be caught
in moving parts.

CAUTION: When not in use, place tool on its
side on a stable surface where it will not cause
a tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack
but may be easily knocked over.
English
3
loading