Idiomas disponibles
Idiomas disponibles
1. Main body
2. Legs
3. Grab handle
4. Fan button
5. Power buttons
6. Temperature regulator
Before using the heater, attach the legs (supplied separately in
the box) to the unit.
• Carefully turn the main body upside down on a stable, scratch-
free surface. Be careful not to damage the cosmetic finish or
surface of your floor.
• Attach the legs to the base of the heater using the 4 supplied
screws, being careful to position them correctly at the lower
ends of the side trims.
WARNING: Operate the appliance in the upright position only with the leg assemblies at-
tached to the bottom. Any other position could create a dangerous situation.
• Always choose a safe location for the heater, taking into account the safety precautions
described.
• Make sure all packaging has been removed from the unit before use.
• This device does not require installation, it must be used only as a portable device.
WARNING:
• Keep all objects at least 1 meter away from the front, sides and back of the appliance.
• To prevent overheating, do not cover the heater.
• Never leave this heater unattended.
• Take special care where you place your heater. A fire may occur if placed next to combus-
tible material.
When the appliance is turned on for the first time, it may give off a slight odor or smoke. This
smell or smoke is a normal occurrence caused by the initial heating of the internal heating
elements and should not occur again.
C O NTROL PAN E L
This heater has two 3 types of power:
• Low Power - 750 W (Left Button).
• Medium power - 1250W (Right button).
• High Power - 2000W (Pressing the two buttons).
•
Fan function (Side button).
E NGL I SH
8
PARTS LIST
1
2
ASSEMBLY
INSTRUCTIONS FOR USE
3
4
5
6
