VERTO 50G139 Manual De Instrucciones página 11

• Screwdriver cannot be started, when the switch is in this position.
• Use this position of the switch to change drills or bits.
• Before starting the tool make sure the position of the direction
selector switch (5) is correct.
Do not change direction of rotation when the spindle of the
screwdriver is rotating.
OPERATION AND MAINTENANCE
MAINTENANCE AND STORAGE
• Cleaning the device after each use is recommended.
• Do not use water or any other liquid for cleaning.
• Clean the screwdriver with a dry cloth.
• Do not use any cleaning agents or solvents, they may damage plastic
parts.
• Store the screwdriver in a dry place, beyond reach of children.
All defects should be repaired by service workshop authorized by the
manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Cordless screwdriver 50G139
Parameter
Battery voltage
Battery type
Battery capacity
Idle rotational speed
Tool holder
Maximal torque
Protection class
Weight
Year of production
50G139 defines type and indication of the device
Charger
Parameter
Supply voltage
Power supply frequency
Charging voltage
Max. charging current
Battery charging time
Protection class
Weight
Year of production
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure
Sound power
Acceleration value
Noise and vibration information
Noise produced by the device is defined with: level of produced sound
pressure L and level of sound power L
pA
uncertainty). Vibrations produced by the device are defined with
vibration acceleration value a (where K is measurement uncertainty).
h
Sound pressure L , sound power L
pA
a specified in this manual have been measured in accordance with
h
EN ISO 3744; EN ISO 11203. Specified vibration level a
compare tools and for initial evaluation of exposition to vibrations.
Specified vibration level is representative only for main applications of
the device. When the device is used for other purposes or with different
working tools, the vibration level may change. Insufficient or too rare
maintenance may increase vibration level. The abovementioned factors
may lead to higher exposure to vibrations during whole working time.
To precisely define exposure to vibrations, include periods when
the device is switched off and when it is switched on but not used
for working. Once all factors have been carefully considered, total
exposition to vibrations may be significantly lower.
To protect the user from results of exposure to vibrations, use additional
safety measures such as: device and working tool periodic maintenance,
proper hand temperature conditions, good work organisation.
Value
3,6 V DC
Li-Ion
1300 mAh
180 min
-1
Hexagonal ¼"
(6,35mm)
5 Nm
III
0,5 kg
2019
Value
230 V AC
50 Hz
5 V DC
800 mA
2 h
II
0,1 kg
2019
L = 66,68 dB(A) K=3dB(A)
pA
L = 77,68 dB(A) K=3dB(A)
WA
a = 0,777 m/s K=1,5 m/s
2 2
h
(where K is measurement
WA
and vibration acceleration
WA
can be used to
h
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household
wastes, they should be utilized in proper plants. Obtain information
on wastes utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in
natural environment. Unrecycled equipment constitutes a potential
risk for environment and human health.
The storage batteries/batteries must not be disposed with domestic
waste, put in a fire or into the water. Damaged or used up storage
batteries must be properly recycled in compliance with the current
directive pertaining to disposal of storage batteries and batteries..
Li-lon
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with
seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all
copyrights to this instruction (hereinafter Instruction), including, but not limited to,
text, photographies, schemes, drawings and layout of the instruction, belong to Grupa
Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz.
U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing,
modifications for commercial purposes of the entire Instruction or its parts without
written permission of Grupa Topex are strictly forbidden and may cause civil and legal
liability.
11