Better Homes and Gardens BHS3025004001 Instrucciones De Montaje página 22

Nylon strap
Metal bracket
Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8" drill bit.
26. Ask for assistance to position the assembled unit at the desired location against a wall. If necessary,
adjust the pre-attached Floor Levelers at the bottom of Side Frames (D and E) and Support Foot (L) to
level the doors and correct the tilting.
27. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately .
28. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the console,
behind the Stop Rail (M).
Assembly Instructions
Wooden stud
Short screw
Wall
Long screw
Children have died from furniture tip over. To reduce the
risk of tip over:
ALWAYS secure this furniture to the wall using an anti-tip

device.
NEVER allow children to stand, climb or hang on drawers,

doors, or shelves.
Place heaviest items in the lowest drawers.

Wall
WARNING
22
Floor leveler