Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Prior to Assembly
The ES726 engine sprayer is shipped in
one carton. Before assembling
your ES726, make sure you have all
the components required for a
complete unit:
I Engine, pump and chemical tank
assembly
I Sprayer Hose
Figure 3
1. Assemble the sprayer hose, valve,
wand and nozzles as shown.
See figure 3.
Filling The Chemical Tank
WARNING!
Clean all chemical spills immedi-
ately! Dispose of any residue in
accordance with all local, state and
federal laws and regulations.
All manuals and user guides at all-guides.com
I Valve
I Spray Wand
I Two head spray nozzle assembly
Super 25 and (D-3) nozzles (2 ea.)
I This manual and tool kit for routine
maintenance.
Carefully inspect all components
for damage, prior to assembly.
Figure 4
2. Mount the spray hose, valve, spray
wand and nozzles firmly to the
discharge outlet on the pump.
See figure 4.
Counter Clockwise to Remove
Figure 6
1. Place the ES726 Engine sprayer on a
level surface. Unscrew the chemical
tank cap counter clockwise.
See figure 6.
IMPORTANT!
The terms "left, "left-hand", and "LH";
"right", "right-hand" and "RH" ; "front"
and" rear" refer to directions as viewed
by the operator during normal operation.
Closed valve
position
Figure 5
3. Keep the valve closed until the
spraying operation has started.
See figure 5.
Figure 7
2. Pour chemical mix through strainer
only.
5
