Idiomas disponibles
Idiomas disponibles
SOUND
CH LEVEL
MODE
CH LEVEL
WOOFER
TONE
CH LEVEL
CONTROL
Sound Control
Bluetooth
PAIR
Play / Pause
PAIR
SOUND
SOUND
MODE
MODE
WOOFER
VOL
WOOFER
TONE
CONTROL
WOOFER
By pressing the button, you can adjust the volume of the each speaker.
TONE
• Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume
CONTROL
between -6~+6 by using the Up/Down buttons.
• If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is
supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/
Down buttons.
By pressing the button, you can set the audio function. The desired settings can be
adjusted using the Up/Down buttons.
AUDIO SYNC
VOICE ENHANCE ON/OFF
– AUDIO SYNC
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control) button to select AUDIO SYNC and then set the audio delay
between 0~300 milliseconds by using the Up/Down buttons. (Not available in "USB"
or "BT" mode.)
– VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
– NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.
• The VOICE ENHANCE, and NIGHT MODE audio function can be turned ON/OFF by
using the Up/Down buttons.
• Press and hold the
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to "STANDARD".)
Press the
PAIR button. "BT PAIRING" appears in the Soundbar's display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
NIGHT MODE ON/OFF
(Sound Control) button for about 5 seconds to adjust the sound
ENG - 10
