Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SLA Series
INTRODUCTION
Thanks for purchasing of SLA Series device. SLA Series is compossed by a range of stereo
amplifiers controlled by RS 485 ( ASCII commands), DMX signal (1 channel), or 0-10V
analog signal.
All devices incorporate fixation pieces in order to place them on walls or ceiling.
This series includes 2 references according to the output power:
SLA 50 (25+25W) & SLA 300 (150+150W)
WARNING
1. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
2. THIS DEVICE SHOULD BE CONNECTED TO A POWER SUPPLY ONLY OF
THE TYPE DESCRIBED IN THE OPERATING INSTRUCTIONS OR AS MARKED
ON THE DEVICE.
3. THIS DEVICE SHOULD BE SITUATED AWAY FROM HIGH VOLTAGE SOURCES.
4. PAY PARTICULAR ATTENTION TO THE POWER SUPPLY POLARITY, DO NOT REVERSE
THE POLARITY.
TECHNICAL SPECIFICATIONS
Output Power
Sensitivity (Vrms)
Power Supply
THD + N
Gain (Unbalanced input)
Minimum Load
Dimensions
Weight
CONNECTIONS
Power Supply
VC Input
Speaker L
Speaker R
Rinput
Linput
RS 485 / DMX IN
RS 485 / DMX OUT
SLA Series (SLA 50 - SLA 300)
OPERATING INSTRUCTIONS
SLA 50
25W + 25W
1V (Unbal.) / 500 mV(Bal.)
(22-28V DC) Tip. 24V DC /2A 48V DC /7A
<0.1%
20 dB
4Ω
81 x 42 x 90 mm
500 g
2 pin euroblock connector (+ and GND). For the
nominal supply of the device.
3 pin euroblock connector. Use a normal
potentiometer. Vo is the input for the central
pin of the potentiometer. Minimum
potentiometer resistance of 10k
2 pin euroblock connector (+ and -).
2 pin euroblock connector (+ and -).
3 pin euroblock connector. Join R- pin to
GND for unbalanced input.
3 pin euroblock connector. Join L- pin to
GND for unbalanced input.
3 pin euroblock connector.
3 pin euroblock connector.
User Manual/Manual de Instrucciones
SLA 300
150W + 150W
1V (Unbal.) / 500 mV(Bal.)
<0.05%
23 dB
4Ω
136 x 42 x 90 mm
600 g
.
Ω
Pag 1
EN
Tabla de contenido
