Work Pro W MINIDIM RGB Pro Manual Del Usuario

DESCRIPTION
Congratulations with your purchase of this product.
MINIDIM RGB PRO. This unit serves as a three channel dimmer. A maximum of up to 12A loads are allowed on three outputs, DMX address enables to be addressed
by flipping the dip-switch. Is designed to set the intensity for RGB LEDs, three channels can be controlled separately. The dimmer features DMX Control Mode, Manual.
Dim Mode and Stand Alone Mode.
BOX CONTENTS
You should be in possession of the following items:
1 MINIDIM RGB PRO
1 Manual
Check for transport damage.
If you discover transport damage after unpacking the equipment, inform the hauler immediately. Never connect a damaged device. You
Power Requirement
12~24VDC,12AMax.
12A,Max. (4A per channel)
Output
OPERATION GUIDE
1. DMX Control Mode (DMX addressing)
In this mode, the dip-switches 10 is flipped to ON. 11 &12 to OFF. The unit needs 3 DMX channel for controlling: Red color is controlled by Channel 1.
Green color is controlled by Channel 2 and Blue color is controlled by Channel 3.
DMX is an universal binary language used as a form of communication between intelligent fixtures. Each Dip Switch represents a binary value.
Dip Switch 1 address equals 1
Dip Switch 2 address equals 2
Dip Switch 3 address equals 4
Dip Switch 4 address equals 8
Dip Switch 5 address equals 16
Dip Switch 6 address equals 32
Dip Switch 7 address equals 64
Dip Switch 8 address equals 128
Dip Switch 9 address equals 256
2.Manual Control Mode
In this mode, the dip-switches 10,12 are flipped to the OFF and 11 to ON. Flip the dip-switch 1~3 to set the intensity of Red LEDs, dip-switch
Green LEDs and dip-switch 7~9 to set the intensity of Blue LEDs. Please refer to the following table for further information.
3.Stand Alone Mode
In this mode, dip switches 10 & 11 are flipped to OFF and dip 12 to ON. With the dips number 1, 2 & 3, we can select the fade time. With dips 4, 5 & 6
it is possible to control the speed, and using dips 7, 8 & 9, it is possible to select the program. See closed tables:
DipSwitch Fadetime Speed Program
Setting
(SW1~3) (SW4~6) (SW7~9)
0 128 s 1
000
64 s 2
14%
100
28% 32 s 3
010
16 s 4
43%
110
8 s 5
57%
001
71% 4 s 6
101
2 s 7
86%
011
Auto(Program 1-7
100% 1 s
111
running in a cycle)
MINIDIM RGB Pro
User Manual
Oper. temperature
Connection
Use the dip switches to set the DMX starting address
For example: Setting DMX address for 21.
Flip switches1,3,&5 to the
"ON"position
1=1
3=4
Dipswitches# 5=16
Intensity Red Green
(SW1~3) (SW4~6)
0 000 000
14% 100 100
28% 010 010
43% 110 110
Program 1: 7 colors changing without fade: Red, Red/Green, Green, Green/Blue, Blue, Blue/Red, White.
Program 2: 6 colors changing with fade: Red, Yellow, Green, Cyan, Blue, Purple.
Program 3: Cyan range. From Blue to Green with tone change.
Program 4: Yellow range: From Red to Green with tone change.
Program 5: Purple range: From Red to Blue with tone change.
o
o
-10 C to +50 C Dimensions
Terminal Blocks Weight
1 2 3 4 5 6 7 8 9 10
START
SWITCHES ON
CH#
1 1
2 2
3 1,2
4 3
5 1,3
6 2,3
7 1,2,3
8 4
9 1,4
Value 2,4
10
=21
Blue
Intensity Red
(SW7~9)
(SW1~3)
000
57% 001
100
71% 101
010
86% 011
110
100% 111
NOTE: For a better
understanding. the
square in white color
is considered the switch
in all pictures of this
user manual
may also contact your supplier.
90(L)x40(W)x18(H)mm
125g
1= ON
11 12
0= OFF
START
SWITCHES ON
CH#
DMX starting address
11 1,2,4
12 3,4
13 1,3,4
2,3,4
14
15 1,2,3,4
1 2 3 4 5 6 7 8 9 10
1,2,3,4,5,6,7,8,9
Green Blue
(SW4~6) (SW7~9)
001 001
1 2 1 2 3 4 5 6 7 8 9 10
101 101
011 011
Red Green
111 111
1 2 3 4 5 6 7 8 9 10
EN
1= ON
12
0=OFF
IP rating
IP 20
1= ON
11 12
0=OFF
4~6 to set the intensity of
1= ON
11 12
0=OFF
Blue
1= ON
11 12
0=OFF
Rev. 14.10.01