Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Operation Guide
3.3 Running a Chase
To run a Chase, this unit must not be in the
unit is in Programmable state, hold on pressing "Fn/Record" button for
about 5 seconds until the LED indicator beside the button blacks out to
exit Programmable state.
CHASE
Mode/Lib
Manual
Music
Auto
CPxx CSx
FT: xxxxx
CPxx CSx
SENS: xxx
CPxx CSx
SP: xxxx
LED Player 100
1. Press the Chase button to choose a chase.
The unit can choose 8 Chases simultaneously.
2. Press UP&DOWN button to change loop
number for the chase.
3. Press "Mode/Lib" button to choose running mode.
There are 3 modes for user selection available in
Manual mode, Music mode and Auto mode.
In Manual mode, press UP&DOWN buttons to
play the next or previous step. Press
"Fn/Record" button, then move fader6 button to
change the fade time between 0second and
10minutes.
"FT" means fadetime.
In Music mode, the rhythm triggers each step.
Users can press UP&DOWN buttons to increase
or decrease the sensitivity number.
"SENS" means sensitive.
In Auto mode, the chase is played automatically.
Users can set speed by quickly pressing the
"Tap/Step" button twice. Alternatively, users can
press "Fn/Record" button, then move fader5
button to change the speed.
"SP" means speed.
User Manual/Instrucciones de Usuario
Programmable
state. If this
PAG. 15
Capítulos
Tabla de contenido
