Chase; Editing A Chase - Work Pro W LED Player 100 Instrucciones De Usuario

EN
Operation Guide

3. Chase

3.1 Editing a Chase

To create a Chase, this unit must be in the
CHASE
Fixture
Fn /Record
CPxx CSxx
Mxx Sxx
LED Player 100
1. Press Chase button to select the Chase which
you want to configure.
2. Press Fixture button to choose a fixture which
you want to edit.
3. To edit a scene, you can move the fader buttons,
or choose a Color Preset, or input DMX signal.
4. Press the "Fn/Record" button to record the
current step and all the LED indicators flash
repeatedly 3 times.
5. Repeat step3~4 to record more steps.
6. If you want to insert a step, press "Tap/Step"
button and the LCD displays as the left figure.
CPxx means Color Preset.
CSxx menas Chase xx.
Mxx means total steps of the Chase.
Sxx menas current step.
Press UP & DOWN buttons to choose the location
to which you want to insert the step. Then repeat
step3~4, a step is insert into current step.
User Manual/Instrucciones de Usuario
Programmable state.
PAG. 13