Operation Guide; Led Fixture Library; Patching A Led Fixture - Work Pro W LED Player 100 Instrucciones De Usuario

EN

Operation Guide

1. LED Fixture Library

All the modification to LED fixture library can be done only in Programmable
state. To enable Programmable state, you simply take the following steps:
Fn /Record

1.1 Patching a LED Fixture

Fix
1.Patch
Fn /Record
REBEL1
- - - - - -
CW
Mode/Lib
LED Player 100
1. Press and hold down the "Fn/Record" button for
about 5 seconds until the LED indicator next to the
"Fn/Record" button blinks. The device is engaged in
programmable state.
2. Press the "Mode/Lib" button to enter LED fixture
Library.
1. Press UP & DOWN buttons to scroll the menu on
Lib
LCD display and select the submenu "1.Patch".
2. Press the "Fn/Record" button to start to patch.
3. Press UP & DOWN buttons to select the desired
LED fixture. Then press the fixture button to which
you want to patch the LED.
4. If you want to choose other LEDs, repeat step3.
5. When you are satisfied with the patch, press the
"Mode/Lib" button to exit.
User Manual/Instrucciones de Usuario
PAG. 7