Ultra Wash ®He Filtration System - Sears Kenmore ULTRA WASH 665.1715 Manual De Uso Y Cuidado

D ng-Rin Aid isessential.
You must use a drying agent
such as rinse aid for good
drying performance. Rinse
aid along with the Heated
Dry option will provide best
drying and avoid excessive
moisture in the dishwasher
interior.
BRTTER D RYING
High Efficiency dishwashers run longer to
save water and energy just as driving a car
slower saves on gas. When you need fast
results, the 1 Hour Wash will clean your
dishes using slightly more water and energy.
For improved drying, select the Heated Dry
option to add additional time to dry.
Press START/RESUME eve time you add
a dish.
To start and resume a cycle, press START/
RESUME and close the door within
3 seconds. If the door is not closed within
3 seconds, the start button LED will flash and
the cycle will not start.
IMPORTANT: If anyone opens the door
(as, to add a dish, even during the Delay
Hours option), the START/RESUME button
must be pressed each time and the door
closed within 3 seconds to resume the cycle.
o
@
RESUME
It is possible to use too much detergent in your dishwasher.
This can lead to etching of your dishes. See "Detergent and
Rinse Aid" to determine the amount of detergent needed
based on your water hardness. Using dishwasher detergent
tablets and packs have been proven better than powder,
liquid or gel detergents to reduce filming on your dishes.
ULTRA WASH ®HE FILTRATION SYSTEM
Your dishwasher has the latest technology in dishwasher filtration. This triple filtration system minimizes sound and optimizes water
and energy consumption while providing superior cleaning performance. Throughout the life of your dishwasher, the filter will require
maintenance to sustain peak cleaning performance.
The triple filter system consists of 2 parts, an upper filter assembly and a lower filter.
The upper filter assembly keeps oversized items and foreign objects, along with very fine food particles out of the pump.
The lower filter keeps food from being recirculated onto your dishware.
Lower Filter
In order to provide optimum cleaning performance we suggest a monthly filter maintenance by removing and inspecting both the
upper and the lower filter for any soils. Based on your dishwashing habits, cleaning of the filters may be required more or less often
than what is indicated in the chart below.
The filters may need to be cleaned when:
Visible objects or soils are on the Upper Filter Assembly.
There is degradation in cleaning performance (that is, soils still present on dishes).
Dishes feel gritty to the touch.
Removing and maintaining the filters is very easy. The chart below shows the recommended cleaning frequency.
10