Idiomas disponibles
Idiomas disponibles
This product uses overload protection
(fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Discard
product if the attachment plug is damaged.
To reduce the risk of fire, electric shock
and personal injury, DO NOT remove,
replace, repair or tamper with the originally
supplied plug. If the fan does not function
properly, it may be due to the safety
device incorporated in this plug.
If the fuse fails, it is generally due to a
short circuit or circuit overload. Replace
the fuse as per the instructions below
(follow product marking for proper fuse
rating) and check the product. If the
replacement fuse fails, a short-circuit
may be present and immediately
unplug the unit and contact our
technical support department for
assistance.
Fuse Replacement:
Grasp plug and remove from the
1.
receptacle or other outlet device.
Do not unplug by pulling on cord.
Locate the door on top of the plug.
Figure 3.
2.
Slide the door on top of the plug
towards the blades. Figure 4.
3.
Carefully remove the fuse from
the clips holding it on the top and
bottom. Risk of fire. Replace fuse
only with 5 Amp, 125 Volt fuse.
Figure 5.
Warning! Electrical Hazard! Only
replace with a fuse type and rating
matching what was removed from the
product. If the product fails a second time,
immediately unplug it and contact our
technical support at 1-888-880-3267.
4.
Gently push the fuse back into
the pins that will hold it in place.
Note: If the fuse is not seated properly,
the unit will not function.
5.
Slide the door back over the fuse
box in the plug.
FUSED PLUG
6.
Risk of fire. Do not replace attachment
plug. Contains a safety device (fuse) that
should not be removed. Discard product
if the attachment plug is damaged.
5
Plug the fan back in and resume
use.
61901-01 R20210927
Figure 3
Figure 4
Figure 5
