Idiomas disponibles
Idiomas disponibles
switched on
Plug not inserted
correctly in socket
Faulty power cable
to electrical panel
Loose wire in
electrical panel
Loose wire in motor
terminal board
Faulty main switch
Residual current
circuit breaker
tripped
The motor does
not stop when
Faulty limit switch
the safety grid is
lifted
Motor starts
Mixture is too stiff
with difficulty
16. SCRAPPING
The machine must be disposed of according to the current
regulations.
The barred bin symbol indicates that at the end of its service
life the product must be scrapped separately from other
materials.
The manufacturer is responsible for separate scrapping of the
equipment at the end of its service life. The user must
therefore contact the manufacturer and follow the instructions
given by the latter for separate scrapping of the equipment at
the end of its service life.
Separate scrapping for subsequent recycling, treatment and
eco-compatible disposal contributes to avoiding negative
effects for the environment and for the health of persons, and
promotes the reuse/recycling of the materials of which the
equipment is fabricated.
Incorrect/illegal scrapping is punishable by law.
IMER INTERNATIONAL S.p.A
Ensure correct
connection
Change power cable
Reconnect wire
Reconnect wire
Replace switch
Reset switch. If it
does not reset, refer
to a qualified
electrician to check
the electrical system
to ensure complete
safety.
Replace limit switch
Reduce mixture
quantity or dilute and
try again.
11
