Oase Water Jet Lightning Instrucciones De Uso página 17

Troubleshooting
Malfunction
The unit does not switch on
LED not lit
Insufficient fountain height
Unit switches off after a brief run-
ning time (approx. 10 s)
Cause
No power supply
The hand-held transmitter does
not transmit
Connection of the Water Jets
faulty
The running unit device is clogged
or soiled
Pump strainer casing soiled
Nozzles soiled
Foam filters soiled
Hose kinked
Y distributor clogged
Regulator on Y-distributor incor-
rectly set
Water temperature too high
Pumps run dry
Remedy
• Check power supply
• Check supply lines
• Insert a new battery
• Teach-in hand-held transmitter
Check connections
Clean the running unit
Clean strainer casing
Clean the nozzles
Wash out foam filters
Lay hose in a sufficiently large bend
Clean Y distributor
Adjust regulator
Note maximum water temperature
of + 95 °F (+35°C). For switching on
again, pull the power plug and rein-
sert in the socket.
Check water level. For switching on
again, pull the power plug and rein-
sert in the socket.
EN
17