Idiomas disponibles
Idiomas disponibles
Note:
Highlight the "X" icon and press ENTER to clear the input area.
Skip the process by directly selecting "NEXT".
Invalid VIN warning will pop up if the VIN does not meet requirements in
terms of length or character. Select "Yes" to continue without modifying
the VIN. Select "No" to return and reenter the VIN.
5. Select "SETUP" to edit the battery testing criteria. (Testing criteria will be
stored after each test, select "START" to reuse previous settings.)
6. Select battery type. (available types: FLOODED, AGM FLAT, AGM SPIRAL,
VRLA/GEL, EFB.)
7. Select rating. (available ratings: CCA/SAE, DIN, EN, EN2, IEC, JIS, CA/MCA)
8. Select capacity. Available capacity range:
25 to 3000 CCA/SAE
25 to 2830 EN
25 to 2710 EN2
25 to 1985 IEC
9. Confirm battery position by
selecting the YES/NO option of
"TEST IN VEHICLE?".
10. The tester will then check if the
user would like to proceed to an
In-Vehicle Test.
If YES, the tester will
automatically proceed to the
system test after the battery
test is completed.
If NO, the tester will perform only the battery test.
11. Temperature compensation. Select if battery temperature is above or below 0
/32 .
12. Test result will be presented after test is completed, use directional keys to
review the test result. Select "PRINT" to print test result. Select "DONE" to
return to the main menu.
JIS (by battery type)
25 to 1685 DIN
25 to 3600 CA/MCA
8
