Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BM 2610035086 05-14_VAC120 5/14/14 8:50 AM Page 8
Disconnect battery pack
W RNING
from tool or place the
switch in the locked or off position before
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of starting
the tool accidentally.
INSTALLING AND REMOVING
CREVICE NOzzLE
To install, firmly insert the crevice nozzle
completely into the intake port on the dust
chamber with the mark (shown in the
illustration) facing down. (Fig. 2).
To remove, simply pull out of dust canister.
INSERTING AND RELEASING
BATTERY PACK
Release battery pack from tool by pressing on
both sides of the battery release tabs and pull
downward (Fig. 3).
To insert battery, align battery and slide
battery pack into tool until it locks into position.
Do not force.
If battery release tabs are
W RNING
cracked
damaged, do not insert into tool. Battery can
fall out during operation.
Assembly
FIG. 2
or
otherwise
FIG. 3
-8-
DUST
CANISTER
CREVICE
NOzzLE
INTAKE
PORT
MARK
B TTERY
RELE SE
T BS
Tabla de contenido
