Diono Radian 3RXT Manual De Instrucciones página 48

7. Attach LATCH/UAS connectors
to vehicle's LATCH/UAS anchors
and listen for audible "click" to
confirm engagement. LATCH/
UAS strap should lie flat and not
be twisted.
8. Tighten the LATCH/UAS strap.
Press down firmly in the center of
the car seat while tightening the
LATCH/UAS strap. You may need to
tighten through the opening in the
cover by the belt path shown, by
pulling it through and up. pulling it through and up.
9. Test for tightness. Grab the side of
the car seat with one hand where
the LATCH/UAS strap is and slide
the seat side-to-side and front-to-
back. If the seat moves less than 1 in
(2.5 cm), it is tight enough. Do not
test by grasping the top or front of
the car seat.
48
own, by
Radian® 3RXT
7
8
9