Diono Radian 3RXT Manual De Instrucciones página 35

2. Remove LATCH/UAS strap from
storage location on back of
seat. Use LATCH/UAS release on
LATCH/UAS connectors and pull
up to remove.
3. Extend the LATCH/UAS strap.
For easier installation, extend the
LATCH/UAS strap to its maximum
length by pressing the grey
button and pulling on the strap.
4. Place LATCH/UAS strap for
access to rear-facing belt path.
From back of seat, unfasten
the right side of the cover from
seat shell. Feed LATCH/UAS
connectors down, keeping under
the cover and out the bottom.
Once completed, refasten the
cover to seat shell.
5. Place car seat rear-facing in
back seat of the vehicle. Center
the car seat between the vehicle
LATCH/UAS anchors. The entire
seat bottom should sit flat on the
vehicle seat.
diono.com
2
3
4
5
35