FIRST SETUP
UNFOLDING AND FOLDING
1. Place car seat on its back on a flat surface and unfasten
red carry strap from the bottom. Be sure the harness
adjuster moves freely and is not locked within the
bottom of the seat.
2. Rotate bottom until your hear it "click", this confirms the
car seat is locked for use.
3. Check proper operation — Pull harness adjusting
strap until harness begins to tighten. If it does not
tighten freely, check the belt path on the back of the
seat bottom is clear from obstruction. To fold seat,
release the levers as shown and repeat the above
steps in reverse.
4. Tuck the red strap through the
harness slot and store behind
the cover.
5. To fold, push lever shown and
secure with red strap.
26
Radian® 3RXT